Fibre-SAS
RAID subsystem, 3U 16-bay rack mount, redundant controllers (two controllers
included) ASIC-G6 with 1024MB DDR2 RAM on each controller (The"Cache
Safe" Technology enabled on both controllers), RAID6. Dual 8G-Fibre host
channels on each controller, SAS drive channels, and SAS expansion ports
(SFF-8088). Redundant PSUs and redundant FANs with LCD front panel. MUX
boards are included in the shipment. MUX boards are required when using
SATA-II drives. MUX boards are not required when using SAS drives. Supports
SAS and SATA-II disks drive mixing. Rack mount kit (36") included and
integrated in the subsystem carton.
Fibre-SAS
RAID subsystem, 3U 16-bay rack mount, single controller ASIC-G6 with 1024MB
DDR2 RAM, RAID6. Dual 8G-Fibre host channels , SAS drive channels, and SAS
expansion port (SFF-8088). Redundant PSUs and redundant FANs with LCD front
panel. Supports SAS and SATA-II disks drive mixing. MUX boards are not
required when using SAS or SATA-II drives. MUX boards are not included. Rack
mount kit (36") included and integrated in the subsystem carton.
The "Cache Safe" technology can be optionally enabled, see
"BBU" section on the "Spare parts and Accessories" page
on this price book.
G6
$8.044
EonStor
Fibre-Fibre RAID Subsystem, SBOD and Controller Head
Fibre-Fibre
(4Gbit) RAID head, 1U rack mount subsystem, single controller ASIC400 with
512MB DDR RAM and BBU, 6 Fibre channels, channel mode user configurable
(totally 12 SFP ports), SAS expansion port (SFF-8470) for connecting SAS
JBOD. Redundant PSUs, redundant FANs with LCD front panel.
Fibre-Fibre
(4Gbit) RAID head, 1U rack mount subsystem, redundant controllers (two
controllers included) ASIC400 with 512MB DDR RAM and BBU in each controller,
6 fibre channels, channel mode user configurable (totally 12 SFP ports) and
SAS Expansion ports (SFF-8470) for connecting SAS JBOD. Redundant PSUs,
redundant FANs with LCD front panel.
Fibre SBOD subsystem, 3U 16-bay rack mount, redundant SES
controller modules (two SES modules included). Redundant PSUs and redundant
FANs with status LEDs (no LCD front panel). Use together with F16F-S4031-65,
F16F-R4031-65, FF-S4030-65 and FF-R4030-65. Connecting directly to
HBA/switch/hub are not supported. Supports Fibre drives only.
Fibre to SATA-II SBOD subsystem, 3U 16-bay rack mount, single
SES controller module. Redundant PSUs and redundant FANs with status LEDs (no
LCD front panel). Use together with F16F-S4031-65, F16F-R4031-65, FF-S4030-65
and FF-R4030-65. Connecting directly to HBA/switch/hub are not supported.
Supports SATA-II drives only.
Fibre-to-SAS
RAID subsystem, 1U 12-bay rack mount, single controller ASIC400 with 512MB
DDR RAM, RAID6. Dual 4G Fibre host channels and SAS drive channels, with SAS
expansion port (SFF-8088). Redundant PSUs and redundant FANs with LCD front
panel. Accommodates 2.5" SAS HDDs only. The 2.5" SATA HDDs are not
supported.
Fibre-to-SAS RAID subsystem, 1U 12-bay rack mount, redundant
controllers (two controllers included) ASIC400 with 512MB DDR RAM and BBU in
each controller, RAID6. Dual 4G Fibre host channels and SAS drive channels,
with SAS expansion port (SFF-8088) in each controller. Redundant PSUs and
redundant FANs with LCD front panel. Accommodates 2.5" SAS HDDs only.
The 2.5" SATA HDDs are not supported.
SAS-SAS RAID subsystem, 1U 12-bay rack mount, single controller
ASIC400 with 512MB DDR RAM, RAID6.Two
SAS host channels (SFF-8088), SAS drive channels, with SAS expansion port
(SFF-8088). Redundant PSUs and redundant FANs with LCD front panel.
Accommodates 2.5" SAS HDDs only. The 2.5" SATA HDDs are not
supported.
SAS-SAS RAID subsystem, 1U 12-bay rack mount, Redundant
Controllers (two controllers included) ASIC400 with 512MB DDR RAM and BBU (in
each controller), RAID6.Two SAS host
channels (SFF-8088), SAS drive channels, with SAS expansion port (SFF-8088)
in each controller. Redundant PSUs and redundant FANs with LCD front panel.
Accommodates 2.5" SAS HDDs only. The 2.5" SATA HDDs are not
supported.
SAS JBOD subsystem, 1U 12-bay rack mount, single controller
module. Two SAS ports (SFF-8088) for connecting RAID controller and chaining
to the next SAS JBOD. Accommodates 2.5" SAS HDDs only. The 2.5"
SATA HDDs are not supported. Use together with B12F/B12S RAID subsystem
series. Connecting directly to HBA/switch/hub are not supported. Redundant
PSUs and redundant FANs with status LEDs (no LCD front panel).
SAS JBOD subsystem, 1U 12-bay rack mount, redundant controllers
(two controller modules included). Two SAS ports (SFF-8088) on each
controller, for connecting RAID controller and chaining to the next SAS JBOD.
Accommodates 2.5" SAS HDDs only. The 2.5" SATA HDDs are not
supported. Use together with B12F/B12S RAID subsystem series. Connecting
directly to HBA/switch/hub are not supported. Redundant PSUs and redundant
FANs with status LEDs (no LCD front panel).
SAS-SAS
RAID subsystem, 2U 12-bay rack mount, single controller ASIC400 with 512MB
DDR RAM, RAID6. Two SAS host channels (SFF-8088), SAS drive channels, with
SAS expansion port (SFF-8088). Add S12S-J1000-G (SAS JBOD) for more disk
drives (check for required SAS cables). Redundant PSUs and redundant FANs
with LCD front panel.
SAS-SAS RAID subsystem, 2U 12-bay rack mount, redundant
controller (two controllers included) ASIC400 with 512MB DDR RAM and BBU in
each controller, RAID6. Two SAS host channels (SFF-8088), SAS drive channels,
with SAS expansion ports (SFF-8088). Add S12S-J1002-R (SAS JBOD) for
additional drives (check required SAS cables). Redundant PSUs and redundant
FANs with LCD front panel.
12 pcs of MUX boards are included in the shipment, to support using SATA-II
drives. Remove MUX boards when using SAS drives.
Fibre-to-SAS RAID subsystem, 2U 12-bay rack mount, single
controller ASIC400 with 512MB DDR RAM, RAID6. Dual 4G Fibre host channels and
SAS drive channels, with SAS expansion port. Redundant PSUs and redundant
FANs with LCD front panel. MUX boards are not required on this model when
using SATA-II drives.
Fibre-to-SAS RAID subsystem, 2U 12-bay rack mount, redundant
controllers (two controllers included) ASIC400 with 512MB DDR RAM and BBU in
each controller, RAID6. Dual 4G Fibre host channels and SAS drive channels,
with SAS expansion port. Redundant PSUs and redundant FANs with LCD front
panel.
12 pcs of MUX boards are included in the shipment, to support using SATA-II
drives. Remove MUX boards when using SAS drives.
SAS-SAS RAID subsystem, 3U 16-bay rack mount, single controller
ASIC400 with 512MB DDR RAM, RAID6. Dual SAS host channels (SFF-8088) (IN-OUT
port for each channel, total 4 SAS ports), SAS drive channels, with SAS
expansion port (SFF-8470). Redundant PSUs and redundant FANs with LCD front
panel.
Special model of S16S-R1030, added support of Seagate ES.2
SATA-II disk drives.If the disk
drives to be used will be SAS or Hitachi SATA-II disks, both -M5 and -A5
models will both work fine. The only additional benefit for this special
model is added support of Seagate ES.2 drives.
Fibre-SAS RAID subsystem, 3U 16-bay rack mount, single
controller ASIC400 with 512MB DDR RAM, RAID6. Dual 4G-Fibre host channels,
SAS drive channels, and SAS expansion port (SFF-8470). Redundant PSUs and
redundant FANs with LCD front panel. MUX boards are not required on this
model when using SATA-II drives.
Fibre-SAS RAID subsystem, 3U 16-bay rack mount, redundant
controllers (two controllers included) ASIC400 with 512MB DDR RAM and BBU
each controller, RAID6. Dual 4G-Fibre host channels, SAS drive channels, and
SAS expansion ports (SFF-8470). Redundant PSUs and redundant FANs with LCD
front panel.
16 pcs of MUX boards are included in the shipment, to support using SATA-II
drives. Remove MUX boards when using SAS drives.
SAS JBOD
subsystem, 2U 12-bay rack mount, single controller module. Two SAS ports
(SFF-8470) for connecting RAID controller and chaining to the next SAS JBOD.
SAS and SATA-II drives both supported. Use together with S12S-G1030 and
S12S-G1033. Connecting directly to HBA/switch/hub are not supported.
Redundant PSUs and redundant FANs with status LEDs (no LCD front panel).
Special model of S12S-J1002-R, added support of Seagate ES.2
SATA-II disk drives.If the disk
drives to be used will be SAS or Hitachi SATA-II disks, both -R and -RA
models will both work fine. The only additional benefit for this special
model is added support of Seagate ES.2 drives.
SAS JBOD subsystem, 3U 16-bay rack mount, single controller
module. Two SAS ports (SFF-8470) for connecting RAID controller and chaining
to the next SAS JBOD. Use together with S16S-1030, S16F-G1430, A24F-G2430 and
FF-S4030-6. Connecting directly to HBA/switch/hub are not supported. SAS and
SATA-II drives both supported. Redundant PSUs and redundant FANs with status
LEDs (no LCD front panel).
Special model of S16S-J1000-R, added support of Seagate ES.2
SATA-II disk drives.If the disk
drives to be used will be SAS or Hitachi SATA-II disks, both -R and -RA
models will both work fine. The only additional benefit for this special
model is added support of Seagate ES.2 drives.
iSCSI-SAS RAID subsystem, 2U 12-bay rack mount, single
controller ASIC400 with 512MB DDR RAM.Two host channels Gigabit Ethernet ports (2 ports) for data access,
one additional 10/100 Ethernet port for RAID management, SAS drive channels
(supporting both SAS and SATA-II drives), with SAS expansion port (SFF-8088).
Redundant PSUs and redundant FANs, with LCD front panel.
iSCSI-SAS RAID subsystem, 2U 12-bay rack mount, redundant
controllers ASIC400 with 512MB DDR RAM in each controller.In each controller: Four host channels
Gigabit Ethernet ports (4 ports) for data access, one additional 10/100
Ethernet port for RAID management, SAS drive channels (supporting both SAS
and SATA-II drives), with SAS expansion port (SFF-8088). Redundant PSUs and
redundant FANs, with LCD front panel.
iSCSI-SAS RAID subsystem, 3U 16-bay rack mount, single
controller ASIC400 with 512MB DDR RAM.Four host channels Gigabit Ethernet ports (4 ports) for data access,
one additional 10/100 Ethernet port for RAID management, SAS drive channels
(supporting both SAS and SATA-II drives), with SAS expansion port (SFF-8088).
Redundant PSUs and redundant FANs, with LCD front panel.
iSCSI-SAS RAID subsystem, 3U 16-bay rack mount, redundant
controllers ASIC400 with 512MB DDR RAM in each controller.In each controller: Four host channels
Gigabit Ethernet ports (4 ports) for data access, one additional 10/100
Ethernet port for RAID management, SAS drive channels (supporting both SAS
and SATA-II drives), with SAS expansion port (SFF-8088). Redundant PSUs and
redundant FANs, with LCD front panel.
ASIC400
$9.143
EonStor SATA
RAID Subsystems (SAS-SATA, Fibre-SATA, SCSI-SATA)
SCSI-to-SATA
RAID subsystem, 1U 4-bay rack mount, single controller with 256MB DDR RAM,
single SCSI-320 host (in-out ports), SATA 3.0G (SATA-II) drive channels.
Single PSU and dual FANs (non-FRU design), no LCD front panel.
SAS-to-SATA RAID subsystem, 8-bay desktop/tower user
convertible, single controller ASIC400 with 256MB SDRAM, single SAS host
channel (SFF-8088), SATA 3.0G (SATA-II) drive channels. No SAS expansion
port. Single PSU and redundant Fans.
SAS-to-SATA RAID subsystem, 8-bay desktop/tower user
convertible, single controller ASIC400 with 256MB SDRAM, dual SAS host
channels (SFF-8088), SATA 3.0G (SATA-II) drive channels. No SAS expansion
port. Redundant PSUs and redundant Fans.
SAS-SATA RAID subsystem, 2U 8-bay rack mount, single controller
ASIC400 with 256MB DDR RAM, RAID6. Dual SAS ports, SATA-II drive channels, no
expansion port. Redundant PSUs and redundant FANs with LCD front panel.
SAS-SATA RAID subsystem, 2U 12-bay rack mount, single controller
ASIC400 with 256MB DDR RAM, RAID6. Dual SAS ports, SATA-II drive channels, no
expansion port. Redundant PSUs and redundant FANs with LCD front panel.
SAS-SATA RAID subsystem, 3U 16-bay rack mount, single controller
ASIC400 with 512MB DDR RAM, RAID6. Dual SAS ports, SATA-II drive channels, no
expansion port. Redundant PSUs and redundant FANs with LCD front panel.
Special model of A16F-R2431, added support of Seagate ES.2
SATA-II disk drives.If the disk
drives to be used will be SAS or Hitachi SATA-II disks, both -15 (-M5) and
-A5 models will both work fine. The only additional benefit for this special
model is added support of Seagate ES.2 drives.
SAS-SATA RAID subsystem, 4U 24-bay rack mount, single controller
ASIC400 with 512MB DDR RAM, RAID6. Dual SAS channels (total 4 SAS ports),
SATA-II drive channels, with SAS expansion port. Redundant PSUs and redundant
FANs with LCD front panel.
SAS-SATA RAID subsystem, 4U 24-bay rack mount, redundant
controllers, ASIC400 with 512MB DDR RAM and BBU in each controller, RAID6.
Dual SAS channels in each controller (total 8 SAS ports), SATA-II drive
channels, with SAS expansion ports. Redundant PSUs and redundant FANs with
LCD front panel.
Fibre-SATA RAID subsystem, 4U 24-bay rack mount, single
controller ASIC400 with 512MB DDR RAM, RAID6. Dual 4G Fibre host channels,
SATA 3.0G (SATA-II) drive channels, SAS expansion port (SFF-8470). Redundant
PSUs and redundant FANs with LCD front panel.
Special model of A24F-R2430, added support of Seagate ES.2
SATA-II disk drives.If the disk
drives to be used will be SAS or Hitachi SATA-II disks, both -M5 and -A5
models will both work fine. The only additional benefit for this special
model is added support of Seagate ES.2 drives.
